Packt+ | Advance your knowledge in tech

0

All Products

Best Sellers

New Releases

Books

Videos

Audiobooks

Free Learning

Raspberry Pi Zero Cookbook

You're reading from Raspberry Pi Zero Cookbook Delve into the practical world of the Raspberry Pi Zero

Product type Paperback

Published in Mar 2017

Publisher Packt

ISBN-13 9781786463852

Length 422 pages

Edition 1st Edition

Languages

Python

Tools

Raspberry Pi

Concepts

Single Board Computers

Author (1):

Edward Snajder

View More author details

Table of Contents (17) Chapters

Raspberry Pi Zero Cookbook

Credits

About the Author

About the Reviewer

www.PacktPub.com

Customer Feedback

Preface

1. Kick-Start Your Raspberry Pi Zero FREE CHAPTER

2. Setting Up Physical and Wireless Connections

3. Programming with Linux

4. Programming with Python

5. Getting Your Hands Dirty Using the GPIO Header

6. Controlling the LEDs and Displays

7. Controlling the Hardware

8. Taking Digital Inputs to the Raspberry Pi Zero

9. Interfacing Sensors with the Raspberry Pi Zero

10. Cooking up Projects to Amaze the World!

Making your RPZ a USB mass storage device

This last hack makes it possible to use your Raspberry Pi Zero as a mass storage device. While at first it doesn't seem like much more than turning it into a flash drive, depending on what you are doing, and what else you are doing with your Raspberry Pi Zero, you can make your Raspberry Pi Zero be recognized as a USB flash drive to other computers.

Getting ready

Since we will be using the USB connection for a mass storage device, we should connect to the Raspberry Pi Zero using the USB-to-serial adapter and the GPIO pins, as shown in the first recipe of this chapter. You can make your modifications here, connect your USB and Raspberry Pi together, reboot, and work with the Pi as a flash drive or as the little computer you're used to.

How to do it...

We're going to add one piece after rootwait to make the Pi enabled for USB mass storage. You've seen this in the previous recipes:
```
        pi@rpz14101:~$ sudo cat /boot/cmdline.txt
        dwc_otg.lpm_enable...
```

The rest of the chapter is locked

Register for a free Packt account to unlock a world of extra content!

A free Packt account unlocks extra newsletters, articles, discounted offers, and much more. Start advancing your knowledge today.

Unlock this book and the full library FREE for 7 days

Get unlimited access to 7000+ expert-authored eBooks and videos courses covering every tech area you can think of

Start free trial

Renews at $15.99/month. Cancel anytime

Authors (1)

Edward Snajder

Edward Snajder

Edward Snajder takes on the challenges of performance, optimization, scalability, and portability for PostgreSQL, Oracle, SQL Server, and MySQL DB engines for the databases behind the Jive platform. He's got hands-on experience with system design, HA, virtualization, and distributed systems, and has had the opportunity to interface with quality engineering, support, technical operations, and professional services when not building things in engineering. In his spare time, he is an Internet of Things enthusiast and has spoken on the wonders of the Raspberry Pi at conferences and user groups. He loves his Raspberry Pis. He has also built his own 3D printer and has several 75%-complete Arduino projects.

See other products by Edward Snajder

Other recommended products

Related to this chapter

Python Programming with Raspberry Pi

Python Programming with Raspberry Pi

Raspberry Pi Zero is a super-small and super-affordable product from Raspberry Pi that is packed with a plethora of features and has grabbed the notice of programmers, especially those who use Python.

Apr 2017 10h 24m

Internet of Things Programming with JavaScript

Internet of Things Programming with JavaScript

This book is for developers who?d like to learn how to set up an IoT system and communicate with connected devices in JavaScript. Both advanced and entry-level developers will find everything they need to explore the potential of JavaScript for IoT programming.

Feb 2017 9h 56m

Wearable-Tech Projects with the Raspberry Pi Zero

Wearable-Tech Projects with the Raspberry Pi Zero

Are you interested in wearable-tech and gadgets? Do you want to know more about how you can use the Raspberry Pi Zero computer? This book has a series of projects which will show you some of the possibilities with wearable-tech and the Pi Zero, guiding you through each one from start to finish. The Raspberry Pi Zero is a revolutionary product, designed and manufactured in the United Kingdom by the Raspberry Pi Foundation. This tiny computer provides powerful features, in spite of being such a small size; it measures a mere 65 x 35 mm! One of the advantages of its tiny size is that it is ideal to be used in wearable-tech projects.

Raspberry Pi Zero W Wireless Projects

Raspberry Pi Zero W Wireless Projects

Wireless communications have spread over the whole world, as the new era of Internet of Things come closer and closer. Low-energy hardware such as the Raspberry Pi Zero Wireless is perfect for many projects. This book introduces you to Raspberry Pi Zero W, the new family member with a wireless extension. Throughout the book, readers will learn how to build inexpensive, fast, and awesome projects to change their everyday routines.

Raspberry Pi 3 Cookbook for Python Programmers

Raspberry Pi 3 Cookbook for Python Programmers

Raspberry Pi 3 is a tiny affordable chip used to learn and program through interactive projects. It has gained a lot of traction as the first choice in single-board computers due to its versatility. It extends a wide range of support to Python programming. This recipe-based guide will allow you to showcase the capabilities of Raspberry Pi 3.

Apr 2018 18h 24m

Hands-On Internet of Things with Blynk

Hands-On Internet of Things with Blynk

Blynk is gaining a lot of popularity among the masses as it is simple and portable to use, and it comes under mobile applications and devices. The book will introduce you to Blynk and will demonstrate how to setup the environment for building IoT applications. You will then deep dive into concepts like building a notification widget, display widget, and controller widgets. Besides this, you will learn how to build a Blynk server and then create a Blynk application on it. You will have hands-on experience in building IoT applications using Blynk.

Hands-On Robotics Programming with C++

Hands-On Robotics Programming with C++

C/C++ is one the legacy programming language for Robotics Programming. This book will help you understand and build complexly structured robots and implement various C/C++ programming libraries in it.

Mar 2019 10h 24m

Raspberry Pi Computer Vision Programming

Raspberry Pi Computer Vision Programming

You will learn the basics of hardware and software required for image processing and computer vision with Raspberry Pi and Python 3. You will have a look at all the major image processing, manipulation, and computer vision techniques and algorithms in detail using engaging examples. You will build a lot of real-life computer vision applications.

Jun 2020 10h 12m

Internet of Things Programming Projects

Internet of Things Programming Projects

Taking a project-based approach this book will help you leverage sensors, actuators, Python programming and Raspberry Pi 3 to build connected things. Each chapter is an independent project where you will learn from connecting devices to building complex IoT projects. You will be well versed in every possible way to make your projects stand out.

Oct 2018 14h 32m

GNU/Linux Rapid Embedded Programming

GNU/Linux Rapid Embedded Programming

Embedded computers have become very complex in the last few years and developers need to easily manage them by focusing on how to solve a problem without wasting time in finding supported peripherals or learning how to manage them. The main challenge with experienced embedded programmers and engineers is really how long it takes to turn an idea into reality, and we show you exactly how to do it. This book shows how to interact with external environments through specific peripherals used in the industry. We will use the latest Linux kernel release 4.4.x and Debian/Ubuntu distributions (with embedded distributions like OpenWrt and Yocto).

Mar 2017 24h 24m

Python Robotics Projects

Python Robotics Projects

This book will cover everything you need to know about robotics and will help you to build smart robots using Python.

May 2018 11h 20m

Practical Python Programming for IoT

Practical Python Programming for IoT

Practical Python Programming for IoT is a practical guide to building electronic circuits and detailed code examples for advanced IoT applications using a Raspberry Pi and Python. It highlights key concepts such as GPIO interfacing, structuring Python-based IoT applications and alternative methods to control electronics over the internet.

Nov 2020 17h 12m

Personalised recommendations for you

Based on your interests and search pattern

Mastering Embedded Linux Development

Mastering Embedded Linux Development

This comprehensive guide is aimed at those who want to take the leap from low-power microcontrollers to high-speed system-on-chips that can efficiently run Linux. Look no further, this book has everything you need to start your journey.

May 2025 23h 40m

The Embedded Linux Security Handbook

The Embedded Linux Security Handbook

This book will guide you through every step of the development process, from design to building, testing, validation, and ultimately supporting the appliance's lifecycle to strengthen the security of your embedded Linux systems.

Apr 2025 9h 16m