Configuring FCoE
FCoE traffic requires dedicated Ethernet VLANs. FCoE VLANs are dedicated during the VSAN configuration. Starting with UCS 2.0 and later, the FCoE VLAN must not conflict with Ethernet VLANs. UCS 2.1 provides FCoE northbound from FI whereas the previous version of FCoE was only possible up to FI where it should be decoded into native FC.
Configuring FCoE involves selecting the Fabric Interconnect unified ports as FCoE ports. To do this, perform the following steps:
- Log into UCS Manager.
- Click on the
Equipment
tab in the navigation pane. - Expand
Fabric Interconnect
and right-click on any unconfigured unified port and selectConfigure as FCoE Uplink Port
orConfigure as FCoE Storage Port
:
